- +92 (321)-100-5010
- cecinpak@gmail.com
Belt cleaners play a crucial role within your belt conveyor system by effectively eliminating carryback from the belt. Carryback is a significant concern in numerous conveyors, leading to frequent clean-up requirements and premature wear on conveyor components, as well as causing other conveying challenges such as belt mistracking. By reducing carryback, you can enhance worker safety, boost operational efficiency, and improve overall productivity.
When selecting a belt cleaner, one must consider the following points:
Primary belt cleaners are specialized belt cleaners precisely engineered to scrape off material adhering to the conveyor belt. Positioned beneath the material flow and mounted to the head pulley, they stand out at removing substantial amount of material, effectively addressing approximately 60-70 percent of the initial carryback.
Our belt cleaners work with all belt sizes or speeds no matter the environment or industry (mines, fertilizer and chemical, foundries and steel mills, ports)
Compact design with shorter pole length
• Standard-duty, solid-blade design
• Visual tension check
• Do-it-yourself installation and minimal maintenance
Secondary cleaners represent another type of belt cleaners specially designed to remove materials that remain on the belt beyond the head pulley. Positioned just after the belt departs from the head pulley and at various points down the beltline, these cleaners excel at eliminating fines and debris. Their efficiency is impressive, often achieving cleaning rates of over 90 percent.
Available for belt width 450-1200mm
Segmented polyurethane blades easily serviceable
Spring tensioned to deliver optimal cleaning performance and blade life
An easy & effective solution for protecting your tail pulley as well as your mechanical splices and lagging the V-Plow is uniquely designed to clean the inside (clean side) of your return belt.
Our special hanging design adapts to various situations as it keeps permanent contact with the belt no matter the wear level of the blade and makes it possible to raise in case of danger.
Available for belt width 450-1200mm
The Diagonal Plow Belt Cleaner is a versatile, economical solution for protecting the tail pulley, drive pulley, or gravity take-up pulleys from carryback materials.
Motorized brush belt cleaner installed under the return belt of conveyor, tips of the cylindrical nylon brush touch the belt surface gently. The rotating brush turns in the opposite direction of the belt and brushes away the sticky materials into the desired place.
Motorized brush belt cleaner are belt splice friendly as they tend no damage to cover strip of belt joint.
Karachi Office:
C-73, 2nd Floor, Block 3, Saadi Town, Karachi
Factory:
Barkat Marriage Hall Street, Nagri Ahmed Shah, Sialkot Road, Gujranwala, Pakistan
©2023. Conveyor Engineering Co . All Rights Reserved.